Produkte

Green Silicon Carbide 1200# for Glass Wafer Grinding and Polishing

$3,350.00 – $3,400.00 / MT

Green Silicon Carbide 1200# for Glass Wafer Grinding and Polishing

Green Silicon Carbide (GC) 1200# powder is a high-purity precision abrasive specially developed for grinding, fine lapping and pre-polishing of glass wafers, optical glass substrates and related semiconductor optical components. It adopts advanced crushing, acid pickling and strict narrow particle size classification processes to guarantee stable and consistent abrasive performance for high-end semiconductor manufacturing.

GC powder features high hardness, sharp cutting edges and moderate self-sharpening property. During wafer processing, grains fracture along the cleavage plane to continuously generate new cutting edges, maintaining steady material removal rate without rapid passivation. Its excellent thermal conductivity effectively dissipates frictional heat generated in grinding, reducing thermal deformation, chipping, edge collapse and subsurface microcracks on thin glass wafers. Low thermal expansion ensures superior form retention for delicate structures such as V-groove substrates and optical cover plates, which are widely adopted in semiconductor packaging, optical communication and optoelectronic modules.

Strict impurity control is a core advantage of this grade. Low iron content and minimal magnetic foreign matters avoid contamination, stains and scattering defects on optical surfaces. The tightly controlled particle size distribution greatly lowers the risk of deep scratches, delivering uniform fine texture and shallow damage layer after fine grinding. It creates an ideal surface foundation for subsequent cerium oxide final polishing, helping reduce polishing workload and improve yield in mass semiconductor production.

Compared with black silicon carbide, green silicon carbide has higher purity and better chemical inertness. Unlike alumina abrasives with poor self-sharpening, GC 1200# balances cutting capacity and surface quality well. It is widely used for fine grinding of glass wafers used in optical transceiver chips, image sensor covers, wafer-level optics and semiconductor light guide components.

Suitable for batch lapping machines and precision surface grinders, this 1200# green silicon carbide powder supports stable, repeatable processing. It helps manufacturers achieve required roughness, profile accuracy and low surface defect rate, serving as a reliable cost-effective abrasive solution for semiconductor glass wafer processing.

TYPICAL CHEMICAL ANALISIS [%]

SiC Fe2O3 F.C F.Si SiO2 LOI
98.0-99.5 ≤0.15  ≤0.30 ≤0.40 ≤0.70 < 0.09

PARTICLE SIZE DISTRIBUTION

CHAPTER Ⅰ(JIS STANDARD)

Size DO(um) D3(um) D50(um) D94(um)
#240 ≤127 ≤103 57.0±3.0 ≥40
#280 ≤112 ≤87 48.0±3.0 ≥33
#320 ≤98 ≤74 40.0±2.5 ≥27
#360 ≤86 ≤66 35.0±2.0 ≥23
#400 ≤75 ≤58 30.0±2.0 ≥20
#500 ≤63 ≤50 25.0±2.0 ≥16
#600 ≤53 ≤41 20.0±1.5 ≥13
#700 ≤45 ≤37 17.0±1.5 ≥11
#800 ≤38 ≤31 14.0±1.0 ≥9.0
#1000 ≤32 ≤27 11.5±1.0 ≥7.0
#1200 ≤27 ≤23 9.5±0.8 ≥5.5
#1500 ≤23 ≤20 8.0±0.6 ≥4.5
#2000 ≤19 ≤17 6.7±0.6 ≥4.0
#2500 ≤16 ≤14 5.5±0.5 ≥3.0
#3000 ≤13 ≤11 4.0±0.5 ≥2.0
#4000 ≤11 ≤8.0 3.0±0.4 ≥1.8
#6000 ≤8.0 ≤5.0 2.0±0.4 ≥0.8
#8000 ≤6.0 ≤3.5 1.2±0.3 ≥0.6

CHAPTER Ⅱ(FEPA STANDARD)

Size D3(um) D50(um)  D94(um)
F230 <82 53.0±3.0 >34
F240 <70 44.5±2.0 >28
F280 <59 36.5±1.5 >22
F320 <49 29.2±1.5 >16.5
F360 <40 22.8±1.5 >12
F400 <32 17.3±1.0 >8
F500 <25 12.8±1.0 >5
F600 <19 9.3±1.0 >3
F800 <14 6.5±1.0 >2
F1000 <10 4.5±0.8 >1
F1200 <7 3.0±0.5 >1(at 80%)
F1500 <5 2.0±0.4 >0.8(at 80%)
F2000 <3.5 1.2±0.3 >0.5(at 80%)

Mainly Applications

-Bonded Abrasives and Coated abrasives

-Blasting,surface Treatment,Rust Removal

-Wet and dry blast media,grinding and polishing etc

-Floor/Wall laminates,Wear-resistant

-Ceramic products: Ceramic and Tiles,Ceramic filter plate,ceramic membrane etc

-Teflon painting etc

– Heat insulating material

-Grinding wheels,Cup wheels,Whetstone,polishing pads etc

-Used for crucibles, parts for kiln burning, mechanical seals, and parts materials to produce semiconductors

TDS nicht hochgeladen

Sicherheitsdatenblatt nicht hochgeladen

KONTAKTIEREN SIE UNS

Telefon

+8618039337725

Adresse

Zimmer 1903, Yaxing Times Plaza, Songshan South Road, Zhengzhou, China

Willkommen, um eine Nachricht zu hinterlassen

Verwandter Blog

Anwendungsgebiete von schwarzem Siliciumcarbidpulver?

Schwarzes Siliciumcarbidpulver wird durch Schmelzen von Quarzsand und Petrolkoks in Hochtemperaturöfen hergestellt. Mit einer Mohs-Härte von 9,2, guter Wärmeleitfähigkeit, mäßiger elektrischer Leitfähigkeit, ausgezeichneter Verschleißfestigkeit und hoher chemischer Stabilität gegenüber Säuren und Laugen findet dieses kostengünstige SiC-Material in zahlreichen Industriezweigen Anwendung, darunter Schleifmittelbearbeitung, Wärmemanagement, Feuerfestmetallurgie und die Herstellung von Verbundwerkstoffen. Seine traditionellste und mengenmäßig größte Anwendung liegt in der Schleif- und Oberflächenbehandlungsindustrie. Korngrößenverfeinerte schwarze Siliciumcarbid-Schleifmittel und -Mikropulver werden häufig zu Schleifscheiben, Schleifbändern, Schleifpapieren und Polierpasten verarbeitet. Es eignet sich hervorragend zum Schleifen von Gusseisen, Nichteisenmetallen wie Aluminium, Kupfer und Messing, Stein, Marmor, Glas und Werkstücken aus nichtmetallischen Werkstoffen mit geringer Zugfestigkeit. Bei Sandstrahl- und Wasserstrahlschneidvorgängen entfernen scharfkantige schwarze SiC-Partikel effizient Rost, Oxidschichten, Grate und alte Beschichtungen und erzielen so eine gleichmäßige matte Oberflächenveredelung für Maschinenteile, Gusskomponenten und Werkstücke.

Mehr lesen "
Scroll to Top

Exklusive Angebote Genuss

Vielen Dank für Ihr Interesse an unserem Produkt! Hinterlassen Sie jetzt eine Nachricht und wir bieten Ihnen exklusive Rabatte oder individuelle Pläne, damit Sie mehr Nutzen daraus ziehen.